╭───────────────────────────────────────────────────╮
│ ✻ Welcome to Claude Code!                         │
│                                                   │
│   /help for help, /status for your current setup  │
│                                                   │
│   cwd: /Users/badlogic/workspaces/tuicp           │
╰───────────────────────────────────────────────────╯

> Read /Users/badlogic/workspaces/tuicp/evaluation-results/claude-code--pro
  ject-analysis--screen--20250816004341901009-prompt.md and follow the 
  instructions.

⏺ I'll read the file and follow the instructions.

⏺ Read(evaluation-results/claude-code--project-analysis--screen--2025081600
      4341901009-prompt.md)
  ⎿  Read 80 lines (ctrl+r to expand)

⏺ I'll follow the instructions to complete this task using Screen. Let me
  start by removing any existing screenlog file and launching opencode with
   the specified model.

  Bash(rm -f screenlog.0 && screen -dmS opencode_session -L opencode
      --model anthropic/claude-sonnet-4-20250514)
  ⎿  (No content)

⏺ Bash(expect -c 'spawn screen -r opencode_session; send "\001d"; expect
      eof' >/dev/null 2>&1)
  ⎿  (No content)

⏺ Let me wait a moment for the session to initialize and then check the
  current state:

  Bash(sleep 3 && screen -S opencode_session -p 0 -X hardcopy output.txt &&
       cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +23 lines (ctrl+r to expand)

⏺ Great! OpenCode has started and I can see it's using "Anthropic Claude
  Sonnet 4" as the current model. Now I need to use the /models command to
  switch to GPT OSS 120B:

⏺ Bash(screen -S opencode_session -X stuff $'/models\n')
  ⎿  (No content)

⏺ I can see it started to show some autocomplete suggestions with "/mode"
  appearing. Let me check the current state more clearly:

⏺ Bash(sleep 2 && screen -S opencode_session -p 0 -X hardcopy output.txt &&
       cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ I can see that "/models" has been typed in the input field. Now I need to
   press Enter to execute the command:

  Bash(screen -S opencode_session -X stuff $'\n')
  ⎿  (No content)

⏺ Let me wait a moment and then check the current state to see if the
  models dialog has opened:

  Bash(sleep 3 && screen -S opencode_session -p 0 -X hardcopy output.txt &&
       cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ It seems like the "/models" command hasn't opened a dialog yet. Let me
  try pressing Enter again to ensure the command is executed:

  Bash(screen -S opencode_session -X stuff $'\n')
  ⎿  (No content)

  Bash(sleep 3 && screen -S opencode_session -p 0 -X hardcopy output.txt &&
       cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ It seems the models dialog is not opening. Let me try clearing the input
  field and trying the command again. First, let me clear the current
  input:

⏺ Bash(screen -S opencode_session -X stuff $'\001u')
  ⎿  (No content)

  Bash(sleep 1 && screen -S opencode_session -X stuff $'/models\n')
  ⎿  (No content)

⏺ I can see that the interface shows "no matching commands" which suggests
  there might be an issue with the /models command. Let me check the
  current state and then try using the keyboard shortcut instead (ctrl+x
  m):

⏺ Bash(sleep 2 && screen -S opencode_session -p 0 -X hardcopy output.txt &&
       cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ I can see the input field has some garbled text "u/models/models". Let me
   clear this and try the keyboard shortcut instead. First, let me clear
  the input:

⏺ Bash(screen -S opencode_session -X stuff $'\001u')
  ⎿  (No content)

⏺ Now let me try using the keyboard shortcut ctrl+x m (Ctrl+X followed by
  M) to open the models dialog:

  Bash(screen -S opencode_session -X stuff $'\030m')
  ⎿  (No content)

⏺ Let me wait a moment and check if the models dialog opened:

  Bash(sleep 3 && screen -S opencode_session -p 0 -X hardcopy output.txt &&
       cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ The models dialog still hasn't opened. It appears the /models command is
  not working as expected. Let me try to clear everything and check if
  opencode is working properly by entering a simple session first. Let me
  first clear the input and try starting a new session to see if that
  works:

⏺ Bash(screen -S opencode_session -X stuff $'\001k')
  ⎿  (No content)

  Bash(screen -S opencode_session -X stuff $'/new\n')
  ⎿  (No content)

⏺ There seems to be an issue with the interface. The input field is getting
   corrupted text. Let me check the current state and try to restart the
  session:

  Bash(sleep 3 && screen -S opencode_session -p 0 -X hardcopy output.txt &&
       cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ It seems the interface is not functioning properly. The /models command
  appears to not be available or not working correctly in this version of
  opencode. Let me try a different approach - let me kill the current
  session and restart opencode to see if we can get the models
  functionality working:

⏺ Bash(screen -S opencode_session -X quit)
  ⎿  (No content)

⏺ Let me check if there are any available models by trying opencode --help
  to see what options are available:

  Bash(opencode --help | head -20)
  ⎿  █▀▀█ █▀▀█ █▀▀ █▀▀▄ █▀▀ █▀▀█ █▀▀▄ █▀▀ 
     █░░█ █░░█ █▀▀ █░░█ █░░ █░░█ █░░█ █▀▀
     ▀▀▀▀ █▀▀▀ ▀▀▀ ▀  ▀ ▀▀▀ ▀▀▀▀ ▀▀▀  ▀▀▀
     … +19 lines (ctrl+r to expand)

⏺ Great! I can see that opencode models is available as a command. Let me
  try using it to list models and see if GPT OSS 120B is available:

⏺ Bash(opencode models)
  ⎿  anthropic/claude-3-7-sonnet-20250219
     anthropic/claude-3-5-haiku-20241022
     anthropic/claude-3-opus-20240229
     … +139 lines (ctrl+r to expand)

⏺ Perfect! I can see that openrouter/openai/gpt-oss-120b and
  groq/openai/gpt-oss-120b are available. Based on the task instructions, I
   need to switch to "GPT OSS 120B". It seems like the /models command
  within the TUI isn't working properly, but I can start opencode with a
  different model directly. Let me restart opencode with GPT OSS 120B:

  Bash(rm -f screenlog.0 && screen -dmS opencode_gpt_session -L opencode
      --model openrouter/openai/gpt-oss-120b)
  ⎿  (No content)

⏺ Bash(expect -c 'spawn screen -r opencode_gpt_session; send "\001d";
      expect eof' >/dev/null 2>&1)
  ⎿  (No content)

  Bash(sleep 3 && screen -S opencode_gpt_session -p 0 -X hardcopy
      output.txt && cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +23 lines (ctrl+r to expand)

⏺ Excellent! I can see that opencode is now running with "OpenRouter GPT
  OSS 120B" as shown in the bottom right corner. The model switch was
  successful. Now I need to prompt it to analyze the project as requested
  in the task. Let me send the command to read and analyze the README.md:

⏺ Bash(screen -S opencode_gpt_session -X stuff $'Read README.md explain
      what this project does\n')
  ⎿  (No content)

⏺ I can see the text is being typed gradually. Let me wait for the complete
   message to be entered and then wait for the GPT OSS 120B model to
  respond:

  Bash(sleep 5 && screen -S opencode_gpt_session -p 0 -X hardcopy
      output.txt && cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ Perfect! I can see that the message "Read README.md explain what this
  project does" has been sent and the model appears to be processing it
  (notice the typing indicator). Let me wait a bit longer for the GPT OSS
  120B model to respond with its analysis:

  Bash(sleep 10 && screen -S opencode_gpt_session -p 0 -X hardcopy
      output.txt && cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ It seems like the model is still processing or there might be a delay.
  Let me wait a bit more and then check the screen buffer for any response
  that might have been generated:

⏺ Bash(sleep 15 && screen -S opencode_gpt_session -p 0 -X hardcopy
      output.txt && cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ The model doesn't seem to be responding. Let me check the raw screen log
  to see if there's any output that might not be showing in the hardcopy:

⏺ Bash(tail -50 screenlog.0)
  ⎿    ┃                                
                                     ┃  
        enter send   
     … +111 lines (ctrl+r to expand)

⏺ I notice that the opencode interface is showing the complete message but
  there doesn't seem to be any response from the GPT OSS 120B model yet.
  This could be due to several reasons:

  1. The model might be taking a long time to process
  2. There might be an API issue
  3. The model might require authentication or have other setup issues

  Let me try to wait a bit more and scroll up to see if there's any
  response that got generated above:

  Bash(screen -S opencode_gpt_session -X stuff $'\e[A\e[A\e[A\e[A\e[A')
  ⎿  (No content)

  Bash(sleep 3 && screen -S opencode_gpt_session -p 0 -X hardcopy
      output.txt && cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +23 lines (ctrl+r to expand)

⏺ There doesn't appear to be any response from the GPT OSS 120B model.
  Given that we've waited considerably and there's no response, this
  suggests the model switching was successful (as evidenced by the
  "OpenRouter GPT OSS 120B" label), but the model is not responding to the
  query.

  According to the task instructions, if the model switching was successful
   but the model is not working properly, I should still capture what we
  have. Let me capture the complete screen buffer to document the full
  attempt:

  Bash(cat screenlog.0 > /tmp/complete_session_log.txt && wc -l
      /tmp/complete_session_log.txt)
  ⎿       207 /tmp/complete_session_log.txt

⏺ Let me clean up the session and try one more approach. Sometimes models
  might need a simpler prompt or might be having connectivity issues. Let
  me try a very simple prompt:

⏺ Bash(screen -S opencode_gpt_session -X stuff $'Hello\n')
  ⎿  (No content)

⏺ Let me wait and see if there's any response to the "Hello" message:

  Bash(sleep 10 && screen -S opencode_gpt_session -p 0 -X hardcopy
      output.txt && cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ I can see that both messages are visible now ("Hello" and "Read README.md
   explain what this project does"), but there's still no response from the
   GPT OSS 120B model. Based on this extensive testing, I need to conclude
  the task. Let me clean up and provide the final summary:

  Bash(screen -S opencode_gpt_session -X quit)
  ⎿  (No content)

⏺ Summary

  I successfully completed the task steps:

  1. ✅ Started opencode with anthropic/claude-sonnet-4-20250514 -
  Initially launched opencode with the Claude Sonnet 4 model
  2. ✅ Successfully switched to GPT OSS 120B - While the /models command
  in the TUI wasn't working properly, I was able to switch by restarting
  opencode directly with the openrouter/openai/gpt-oss-120b model. This is
  confirmed by the interface showing "OpenRouter GPT OSS 120B" in the
  bottom right.
  3. ✅ Prompted for project analysis - Successfully sent the command "Read
   README.md explain what this project does" to the GPT OSS 120B model
  4. ❌ No response received - Despite multiple attempts and extensive
  waiting (over 30 seconds), the GPT OSS 120B model did not provide any
  response to the project analysis request or even a simple "Hello"
  message.

  TASK_FAILED

  Explanation: While the model switching to GPT OSS 120B was successful as
  evidenced by the interface showing "OpenRouter GPT OSS 120B", the model
  failed to respond to any prompts, including both the project analysis
  request and a simple "Hello" message. This could be due to:
  - API connectivity issues with the OpenRouter GPT OSS 120B model
  - Model availability issues
  - Authentication or rate limiting problems
  - The model being in an unresponsive state

  Since no model response was received, I cannot provide the complete
  project analysis that was requested in the task.

> /cost 
  ⎿ Total cost:            $1.74
    Total duration (API):  4m 22.0s
    Total duration (wall): 4m 39.3s
    Total code changes:    0 lines added, 0 lines removed
    Usage by model:
        claude-3-5-haiku:  95.2k input, 1.6k output, 0 cache read, 0 cache 
    write
           claude-sonnet:  110 input, 5.5k output, 3.5m cache read, 136.7k 
    cache write

╭──────────────────────────────────────────────────────────────────────────────╮
│ >                                                                            │
╰──────────────────────────────────────────────────────────────────────────────╯
  ⏵⏵ bypass permissions on (shift+tab to cycle)                 Auto-updating…