╭───────────────────────────────────────────────────╮
│ ✻ Welcome to Claude Code!                         │
│                                                   │
│   /help for help, /status for your current setup  │
│                                                   │
│   cwd: /Users/badlogic/workspaces/tuicp           │
╰───────────────────────────────────────────────────╯

> Read /Users/badlogic/workspaces/tuicp/evaluation-results/claude-code--pro
  ject-analysis--screen--20250816004011318008-prompt.md and follow the 
  instructions.

⏺ I'll read the file and follow the instructions.

⏺ Read(evaluation-results/claude-code--project-analysis--screen--2025081600
      4011318008-prompt.md)
  ⎿  Read 80 lines (ctrl+r to expand)

⏺ I need to follow the instructions to start opencode, switch to GPT OSS
  120B model, and analyze the project. I'll use Screen to complete this
  task.

  Bash(rm -f screenlog.0 && screen -dmS opencode -L opencode --model
      anthropic/claude-sonnet-4-20250514)
  ⎿  (No content)

⏺ Bash(expect -c 'spawn screen -r opencode; send "\001d"; expect eof'
      >/dev/null 2>&1)
  ⎿  (No content)

  Bash(sleep 3 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +23 lines (ctrl+r to expand)

⏺ Good, opencode has started. Now I need to switch to GPT OSS 120B using
  the /models command.

⏺ Bash(screen -S opencode -X stuff $'/models\n')
  ⎿  (No content)

⏺ I can see I'm typing "/model" but need to complete it. Let me wait a
  moment for the screen to update and then check the current state.

⏺ Bash(sleep 2 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ Perfect! I can see that "/models" has been typed in the input field. Now
  I need to press Enter to execute the command.

  Bash(screen -S opencode -X stuff $'\n')
  ⎿  (No content)

  Bash(sleep 3 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ It seems the models dialog hasn't opened yet. Let me wait a bit longer
  and try again.

⏺ Bash(sleep 5 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ Let me check if there's any activity in the screenlog to see what's
  happening:

⏺ Bash(tail -20 screenlog.0)
  ⎿                        █░░█ █░░█ █▀▀ █░░█ █░░
      █░░█ █░░█ █▀▀                      
                           ▀▀▀▀ █▀▀▀ ▀▀▀ ▀  ▀ ▀▀▀
     … +42 lines (ctrl+r to expand)

⏺ It seems like the command isn't being processed. Let me try pressing
  Enter again to ensure it gets executed:

⏺ Bash(screen -S opencode -X stuff $'\n')
  ⎿  (No content)

⏺ Bash(sleep 3 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ The models dialog doesn't seem to be opening. Let me try using the
  keyboard shortcut instead (Ctrl+X M):

  Bash(screen -S opencode -X stuff $'\030m')
  ⎿  (No content)

  Bash(sleep 3 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ I see the issue - it shows "/modelsm" instead of "/models". I need to
  clear this and try again. Let me clear the input and type just "/models"
  properly:

⏺ Bash(screen -S opencode -X stuff $'\025')
  ⎿  (No content)

⏺ Bash(screen -S opencode -X stuff $'/models\n')
  ⎿  (No content)

⏺ Bash(sleep 3 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ Now I see "/models" is in the input field again. Let me press Enter to
  execute it:

⏺ Bash(screen -S opencode -X stuff $'\n')
  ⎿  (No content)

⏺ Bash(sleep 3 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ It seems the /models command is not working. Let me try to force a new
  session or restart opencode. First, let me check if there are any error
  messages by looking at the full screenlog:

⏺ Bash(tail -50 screenlog.0)
  ⎿    ┃                                
                                     ┃  
        enter send   
     … +118 lines (ctrl+r to expand)

⏺ It seems like opencode may not be responding properly to the /models
  command. Let me try to quit the current session and restart opencode, as
  it might be in a non-responsive state.

  Bash(screen -S opencode -X quit)
  ⎿  (No content)

  Bash(rm -f screenlog.0 && screen -dmS opencode -L opencode --model
      anthropic/claude-sonnet-4-20250514)
  ⎿  (No content)

  Bash(expect -c 'spawn screen -r opencode; send "\001d"; expect eof'
      >/dev/null 2>&1)
  ⎿  (No content)

  Bash(sleep 5 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +23 lines (ctrl+r to expand)

⏺ Great! Now I have a fresh opencode session. Let me try the /models
  command again:

  Bash(screen -S opencode -X stuff $'/models\n')
  ⎿  (No content)

⏺ I can see that it's typing "/mode" instead of "/models". Let me wait and
  check the current state:

  Bash(sleep 3 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ Perfect! Now I can see "/models" is correctly typed in the input field.
  Let me press Enter to execute it:

  Bash(screen -S opencode -X stuff $'\n')
  ⎿  (No content)

  Bash(sleep 3 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ It seems like the /models command is still not working properly. Let me
  try to see if this version of opencode supports the GPT OSS 120B model by
   checking what happens if I simply try to proceed with the current Claude
   Sonnet 4 model. According to the task, if I cannot successfully switch
  to GPT OSS 120B, the task has failed. However, let me first try a
  different approach - maybe the models command works but there's a delay.

  Bash(sleep 10 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ Let me try one more attempt by using the keyboard shortcut combination.
  Perhaps the issue is with my approach:

  Bash(screen -S opencode -X stuff $'\030m')
  ⎿  (No content)

  Bash(sleep 5 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ I can see the issue - it keeps adding an 'm' to "/models" making it
  "/modelsm" which results in "no matching commands". This suggests that
  the /models command is not available or there's a compatibility issue
  with this version of opencode.

  Based on the task instructions, it clearly states: "IMPORTANT: If you
  cannot successfully switch to GPT OSS 120B, the task has failed. Report
  that the model switching failed and do not proceed with the analysis."

  Since I've tried multiple approaches to access the models dialog (/models
   command, keyboard shortcuts) and none are working, I must conclude that
  model switching has failed.

  Bash(screen -S opencode -X quit)
  ⎿  (No content)

⏺ TASK_FAILED

  The model switching failed. I was unable to successfully switch to GPT
  OSS 120B using the /models command or keyboard shortcuts in opencode
  v0.5.3. Multiple attempts to access the models dialog were unsuccessful -
   the /models command either did not respond or showed "no matching
  commands" when additional characters were inadvertently appended. Since
  the task explicitly requires switching to GPT OSS 120B and states that
  failure to do so means the task has failed, I cannot proceed with the
  project analysis.

> /cost 
  ⎿ Total cost:            $1.36
    Total duration (API):  3m 31.6s
    Total duration (wall): 3m 29.2s
    Total code changes:    0 lines added, 0 lines removed
    Usage by model:
        claude-3-5-haiku:  64.2k input, 1.3k output, 0 cache read, 0 cache 
    write
           claude-sonnet:  128 input, 4.2k output, 2.8m cache read, 107.0k 
    cache write

╭──────────────────────────────────────────────────────────────────────────────╮
│ >                                                                            │
╰──────────────────────────────────────────────────────────────────────────────╯
  ⏵⏵ bypass permissions on (shift+tab to cycle)                 Auto-updating…