╭───────────────────────────────────────────────────╮
│ ✻ Welcome to Claude Code!                         │
│                                                   │
│   /help for help, /status for your current setup  │
│                                                   │
│   cwd: /Users/badlogic/workspaces/tuicp           │
╰───────────────────────────────────────────────────╯

> Read /Users/badlogic/workspaces/tuicp/evaluation-results/claude-code--pro
  ject-analysis--screen--20250816002032791002-prompt.md and follow the 
  instructions.

⏺ Read(evaluation-results/claude-code--project-analysis--screen--2025081600
      2032791002-prompt.md)
  ⎿  Read 80 lines (ctrl+r to expand)

⏺ I'll follow the instructions to complete this task using Screen. Let me
  start by removing any existing screenlog file and starting opencode with
  the specified model.

  Bash(rm -f screenlog.0 && screen -dmS opencode -L opencode --model
      anthropic/claude-sonnet-4-20250514)
  ⎿  (No content)

⏺ Bash(expect -c 'spawn screen -r opencode; send "\001d"; expect eof'
      >/dev/null 2>&1)
  ⎿  (No content)

⏺ Now let me check the current state and then send the /models command:

  Bash(screen -S opencode -p 0 -X hardcopy output.txt && cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +23 lines (ctrl+r to expand)

⏺ Good! OpenCode is running with Claude Sonnet 4. Now I'll send the /models
   command to switch to GPT OSS 120B:

⏺ Bash(screen -S opencode -X stuff $'/models\n')
  ⎿  (No content)

⏺ I can see the /models command autocomplete menu is open. Now I need to
  clear the current input and type "GPT OSS 120B" to search for that model.
   Let me press Enter to activate the /models command first:

  Bash(screen -S opencode -X stuff $'\n')
  ⎿  (No content)

  Bash(screen -S opencode -p 0 -X hardcopy output.txt && cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ I can see that the input field has "/models" in it. Now I need to press
  Enter to execute the command:

  Bash(screen -S opencode -X stuff $'\n')
  ⎿  (No content)

⏺ Let me wait a moment for the models dialog to load and then check the
  viewport:

  Bash(sleep 2 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ It seems the models dialog hasn't opened yet. Let me try a different
  approach - let me check the screen session directly and try pressing
  Enter again:

  Bash(screen -S opencode -X stuff $'\n')
  ⎿  (No content)

⏺ Bash(sleep 3 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ It seems like the command isn't executing. Let me try using the keyboard
  shortcut instead (ctrl+x m) as shown in the interface:

  Bash(screen -S opencode -X stuff $'\030m')
  ⎿  (No content)

⏺ I see that the ctrl+x m added an 'm' at the end. Let me clear this and
  try a different approach. Let me clear the input and start fresh:

⏺ Bash(screen -S opencode -X stuff $'\003')
  ⎿  (No content)

⏺ Let me check the current viewport after the Ctrl+C:

⏺ Bash(screen -S opencode -p 0 -X hardcopy output.txt && cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +23 lines (ctrl+r to expand)

⏺ I can see there's still "/modelsm" in the input field. Let me clear this
  and try typing the command correctly:

  Bash(screen -S opencode -X stuff $'\001u')
  ⎿  (No content)

⏺ Let me try using backspace to clear the extra 'm' character:

⏺ Bash(screen -S opencode -X stuff $'\b')
  ⎿  (No content)

⏺ Now I see it shows "u/modelsm". Let me clear the entire line and try
  again:

  Bash(screen -S opencode -X stuff $'\025')
  ⎿  (No content)

⏺ Good! Now let me check the current viewport to see if the line is
  cleared:

  Bash(screen -S opencode -p 0 -X hardcopy output.txt && cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +23 lines (ctrl+r to expand)

⏺ I still see "/modelsm" in the input. Let me try pressing Escape to cancel
   any current action and then type the command fresh:

⏺ Bash(screen -S opencode -X stuff $'\e')
  ⎿  (No content)

⏺ Bash(screen -S opencode -p 0 -X hardcopy output.txt && cat output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +23 lines (ctrl+r to expand)

⏺ The text is still there. Let me try to exit and restart the opencode
  session since there might be an issue with the command interface:

  Bash(screen -S opencode -X quit)
  ⎿  (No content)

  Bash(rm -f screenlog.0 && screen -dmS opencode -L opencode --model
      anthropic/claude-sonnet-4-20250514)
  ⎿  (No content)

  Bash(expect -c 'spawn screen -r opencode; send "\001d"; expect eof'
      >/dev/null 2>&1)
  ⎿  (No content)

  Bash(sleep 3 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +23 lines (ctrl+r to expand)

⏺ Perfect! Now I have a clean session. Let me type the /models command
  properly:

  Bash(screen -S opencode -X stuff $'/models\n')
  ⎿  (No content)

⏺ I can see the autocomplete menu has appeared. I need to wait for the full
   models dialog to load. Let me wait a bit longer and then press Enter to
  execute the /models command:

  Bash(sleep 3 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ Great! I can see the autocomplete is showing "/models" as an option. Now
  I'll press Enter to execute the command:

  Bash(screen -S opencode -X stuff $'\n')
  ⎿  (No content)

⏺ Bash(sleep 5 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ It seems the models dialog hasn't opened yet. The command might not be
  working as expected. Let me try a different approach and check if the
  opencode version supports the /models command. Let me try pressing Enter
  again to ensure the command executes:

⏺ Bash(screen -S opencode -X stuff $'\n')
  ⎿  (No content)

⏺ Bash(sleep 3 && screen -S opencode -p 0 -X hardcopy output.txt && cat
      output.txt)
  ⎿                        ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� ���� ��� ���� ���� ���
                           ���� ���� ��� �  � ��� ���� ���  ���
     … +24 lines (ctrl+r to expand)

⏺ It appears that the /models command is not executing properly. Let me
  check the full screen log to see if there are any error messages or if
  the models dialog opened but isn't visible in the current viewport:

⏺ Bash(tail -20 screenlog.0)
  ⎿                        █░░█ █░░█ █▀▀ █░░█ █░░
      █░░█ █░░█ █▀▀                      
                           ▀▀▀▀ █▀▀▀ ▀▀▀ ▀  ▀ ▀▀▀
     … +42 lines (ctrl+r to expand)

⏺ It seems like the /models command is not working properly or the models
  dialog is not opening. This could be because:

  1. The models feature might not be available in this version of opencode
  2. There might be no available models to switch to
  3. The command might not be supported

  Since I cannot successfully switch to GPT OSS 120B, according to the task
   instructions, this means the task has failed. Let me clean up the
  session and report the failure:

⏺ Bash(screen -S opencode -X quit)
  ⎿  (No content)

⏺ TASK_FAILED

  The model switching failed. I was unable to successfully switch from the
  anthropic/claude-sonnet-4-20250514 model to GPT OSS 120B using the
  /models command in opencode. The /models command appeared in the
  autocomplete menu but did not execute properly when pressed Enter
  multiple times. The models selection dialog never opened, preventing me
  from selecting GPT OSS 120B. Since the task explicitly states that
  failure to switch models means the task has failed, I cannot proceed with
   the project analysis portion of the task.

> /cost 
  ⎿ Total cost:            $1.23
    Total duration (API):  3m 54.9s
    Total duration (wall): 3m 29.2s
    Total code changes:    0 lines added, 0 lines removed
    Usage by model:
        claude-3-5-haiku:  61.1k input, 1.3k output, 0 cache read, 0 cache 
    write
           claude-sonnet:  154 input, 4.1k output, 2.6m cache read, 91.1k 
    cache write

╭──────────────────────────────────────────────────────────────────────────────╮
│ >                                                                            │
╰──────────────────────────────────────────────────────────────────────────────╯
  ⏵⏵ bypass permissions on (shift+tab to cycle)                 Auto-updating…